Download and Install instructions for 

Trams Scripts for Apollo® Users.

Go to the web site at www.shelleyconsulting.com.  Find a link that says Download and click that. You will be prompted for a user name and password.  Enter the user name and password given to you by Shelley Consulting.  You will see another screen with a link that says Trams Scripts for Apollo® Users, click that and you will be on the Trams Scripts for Apollo® Users  Download Page. During the download and install process, wherever there is a password required, you will be given that password by Bill Shelley.

It is recommended that you run the installation from the internet on each workstation. If you choose to save the file, please remember where you saved it so you can access it later. If you have multiple workstations, you may want to save it to a shared folder on your network.

After installing the scripts on your workstations you will need to create a method of running them. There are several ways to do this. Creating the Window and Icon is the most popular way of setting up a shortcut to the scripts.  However you do it, the main run script is named Trams.key. This is the script to which your shortcut should point. 

Creating Window and Icon

Step 1. Type Alt-R to open the Scriptwriter Plus™ screen. You should see a blank gray screen.

Step 2. Click Window and then click New Window.

Step 3. In Window Title, Type Trams

Step 4. Click drop down arrow under Host and select Focalpoint®/Apollo®. Then Click OK.

Step 5. You should have a blank white screen. Click File, and Add Icon.

Step 6. In description type Trams Scripts.

Step 7. Click Browse. Select Trams.key from the List. Click OK.

Step 8. If you do not see Trams.key then you need to install the scripts again.

You will also need a license file that will be given to you separately that needs to be installed on each workstation.  Instructions for that will accompany the license file.

After installing and adding the license file, there will be some setup in Focalpoint®  to create 3 profiles which the scripts will use.  The instructions for this set up are in a separate document titled Initial Profile Creation.

If you have any questions, email Bill Shelley or call him at 281-335-1774.

Back to Instruction Page                                     Create Initial Profiles    

Shelley Consulting Home